Publikationen

Peer reviewed papers | 2024

A Comparison of the Effects of Continuous Illumination and Day/Night Regimes on PHB Accumulation in Synechocystis Cells

Fleischhacker-Daffert C, Zerobin A, Hummel F, Slaninova E, Kroupová Z, Obruca S, Mrazova K, Hrubanova K, Krzyzanek V, Nebesarova J, Ludwig K, Fritz I. A Comparison of the Effects of Continuous Illumination and Day/Night Regimes on PHB Accumulation in Synechocystis Cells. Life. July 2024.14 (7): 907.

External Link Details

Poly(3-hydroxybutyrate) (PHB) is a biobased and biodegradable polymer with properties comparable to polypropylene and therefore has the potential to replace conventional plastics. PHB is intracellularly accumulated by prokaryotic organisms. For the cells PHB functions manly as carbon and energy source, but all possible functions of PHB are still not known. Synechocystis (cyanobacteria) accumulates PHB using light as energy and CO2 as carbon source. The main trigger for PHB accumulation in cyanobacteria is nitrogen and phosphorous depletion with simultaneous surplus of carbon and energy. For the above reasons, obtaining knowledge about external factors influencing PHB accumulation is of highest interest. This study compares the effect of continuous light exposure and day/night (16/8 h) cycles on selected physiology parameters of three Synechocystis strains. We show that continuous illumination at moderate light intensities leads to an increased PHB accumulation in Synechocystis salina CCALA 192 (max. 14.2% CDW – cell dry weight) compared to day/night cycles (3.7% CDW). In addition to PHB content, glycogen and cell size increased, while cell density and cell viability decreased. The results offer new approaches for further studies to gain deeper insights into the role of PHB in cyanobacteria to obtain bioplastics in a more sustainable and environmentally friendly way.

Peer reviewed papers | 2024

Advancing Green Hydrogen Purity with Iron-Based Self-Cleaning Oxygen Carriers in Chemical Looping Hydrogen

Blaschke F, Prasad BP, Machado Charry E, Halper K, Fuchs M, Resel R, Zojer K, Lammer M, Hasso R, Hacker V. Advancing Green Hydrogen Purity with Iron-Based Self-Cleaning Oxygen Carriers in Chemical Looping Hydrogen. Catalysts. 2024. 14(8):515

External Link Details

Green hydrogen is central to the energy transition, but its production often requires expensive materials and poses environmental risks due to the perfluorinated substances used in electrolysis. This study introduces a transformative approach to green hydrogen production via chemical looping, utilizing an iron-based oxygen carrier with yttrium-stabilized zirconium oxide (YSZ). A significant innovation is the replacement of Al2O3 with SiO2 as an inert support pellet, enhancing process efficiency and reducing CO2 contamination by minimizing carbon deposition by up to 700%. The major findings include achieving a remarkable hydrogen purity of 99.994% without the need for additional purification methods. The Fe-YSZ oxygen carrier possesses a significantly higher pore volume of 323 mm³/g and pore surface area of 18.3 m²/g, increasing the pore volume in the iron matrix by up to 50%, further improving efficiency. The catalytic system exhibits a unique self-cleaning effect, substantially reducing CO2 contamination. Fe-YSZ-SiO2 demonstrated CO2 contamination levels below 100 ppm, which is particularly noteworthy. This research advances our understanding of chemical looping mechanisms and offers practical, sustainable solutions for green hydrogen production, highlighting the crucial synergy between support pellets and oxygen carriers. These findings underscore the potential of chemical looping hydrogen (CLH) technology for use in efficient and environmentally friendly hydrogen production, contributing to the transition to cleaner energy sources.

Peer reviewed papers | 2024

An econometric analysis of the sawmill by-product market to explore bioeconomy options in Austria

Fuhrmann M, Dißauer C, Strasser C, Schmid E. An econometric analysis of the sawmill by-product market to explore bioeconomy options in Austria. Biomass and Bioenergy. 2024.180:107007

External Link Details

Bioeconomy strategies promote higher shares of biomass products in material and energy sectors. Deploying by-products from sawmills is therefore of major interest. This study aims at analyzing market characteristics and implications of bioeconomy strategies by combining three methods: First, an econometric supply and demand model for sawmill by-products (SBP) was estimated based on data from 2001 to 2020. Second, the model was used to analyze a reference and a bioeconomy scenario. Third, a use case was analyzed dealing with the integration of wood gasification and BioSNG (Synthetic Natural Gas) production into Austrian flows of SBP. The results indicate that SBP supply reacts unit-elastic to sawnwood exports, while both supply and demand respond inelastic to SBP prices. Demand is positively inelastic related to SBP as input in panel and pellet production. In a bioeconomy scenario, long-term supply would exceed demand, resulting in additional SBP to be used for gasification. A 100 MW BioSNG plant converting these SBP could provide 528 MWh BioSNG per year. This is a 11 % share of the Austrian target value of 5 TWh green gas.

 

Peer reviewed papers | 2024

Ash Formation during Combustion of Rice Husks in Entrained Flow Conversion Conditions

Pachchigar S, Hannl TK, Öhman M. Ash Formation during Combustion of Rice Husks in Entrained Flow Conversion Conditions. Energy and Fuel. 27 June 2024. 10.1021/acs.energyfuels.4c01413

External Link Details

This study investigates the detailed ash transformation process during the combustion of rice husks in entrained flow conditions. The experiments were conducted in a lab-scale drop tube furnace at 1200 and 1450 °C in pyrolysis/devolatilization (using N2) and combustion (using air) conditions. The detailed ash transformation process during the different fuel conversion stages in combustion (i.e., devolatilization and char combustion) was investigated by comparing the results obtained in the pyrolysis/devolatilization experiments with the combustion experiments. The resulting residual chars, ashes, and particulate matter (PM) were collected and characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM–EDS), X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP-AES), ion chromatography (IC), and CHN analyses. Furthermore, the obtained results were interpreted via thermodynamic equilibrium calculations (TECs). For all investigated conditions, Si, Ca, and Mg were retained entirely in the coarse ash and char fractions (>1 μm). Meanwhile, K and P were found in coarse ash/char fractions and fine particulate fractions (<1 μm). A moderate, at 1200 °C, to high share, at 1450 °C, of the detected K and P was found in the fine particle fractions after combustion. The majority (>95%) of the detected S and Cl were volatilized during the experiments. The study showed an accumulation of minor ash-forming elements (i.e., K, Ca, Mg, P) on the inner part of rice husk chars, initiating melt formation during the char combustion stage. The identified melt at 1200 °C after combustion was rich in Si with minor amounts of K, Ca, Mg, and P. The share of molten ashes was increased at 1450 °C compared to that at 1200 °C. Overall, the results presented in this work reveal detailed insights into the ash transformation processes taking place in different parts of the fuel during the combustion of rice husks in entrained flow conditions.

Other Publications | 2024

Automation and Control of Renewable Energy Systems

Automation and Control of Renewable Energy Systems. Centre's Day 2024

Download PDF Details
Peer reviewed papers | 2024

Bed material performance of quartz, natural K-feldspar, and olivine in bubbling fluidized bed combustion of barley straw

Bozaghian Bäckman M, Rebbling A, Kuba M, Larsson SH, Skoglund N. Bed material performance of quartz, natural K-feldspar, and olivine in bubbling fluidized bed combustion of barley straw. Fuel. 15 May 2024.364:130788.

External Link Details


The present study investigates how three different silicate-based bed materials behave in bubbling fluidized bed combustion of a model agricultural residue with respect to ash composition, namely barley straw. Quartz, natural K-feldspar, and olivine were all used in combustion at 700 °C, and the resulting layer formation and bed agglomeration characteristics were determined. Based on this, a general reaction model for bed ash from agricultural residues was proposed, taking into account the reactivity of the different silicates investigated towards the main ash-forming elements K, Ca, and Si. The proposed reaction model links bed material interaction with K-rich bed ash to the degree of polymerization of the silicate bed material, where addition reactions occur in systems with high polymerization, predominately in quartz, and substitution reactions dominate for depolymerized silicates such as K-feldspar and olivine.

Other Publications | 2024

BEST Centre's Day 2024

External Link Details

Green Carbon Liquids - staged condensation from lab-scale pyrolysis; Green Gas - Green Heat for Industrie from Biogenic Waste; Biohydrogen - Implementation of Dark Fermentation for Industrial Wastewater Treatment; Effects of the climate crisis and pesticide use on fatty acida in the food web; Syngas production from biogenic residues and waste via advanced dual fluidized bed gasification; New developments in gas cleaning for the production of C-based products and fuels via gasification; Advancements in Fischer-Tropsch synthesis using a slurry bubble column reactor; Biofuels - a crucial part of decarbinisation; Speed-Up Algorithms for advanced simulations; Multiscale modeling of metal oxide and biomass conversion for chemical looping processes; Multiscale modeling of metal oxide and biomass conversion for chemical looping processes; Model-Based Control of the Generated Steam Mass Flow in a Fluidized-Bed Waste Incineration Plant; Modular, predictive, optimization-based supervisory control of multi-energy systems; Monitoring of a Renewable Flow Battery; Use cases of optimally planned multi-energy systems with OptEnGrid: hotel resort and renewable energy communities; Optimal Design of Multi-Energy Systems using OptEnGrid; Sustainability assessment: mere obligation or a key to success; 

Other Publications | 2024

BIG-GreenGas (FFG Branchenprojekt)

Egger A, Huber M, Obermann M, Furhmann M, Matschegg D, Thelen F, Mayer C, Bartik A, Kadlez D, Dißauer C, Strasser C, Fürsatz K. BIG-GreenGas. Centre's Day 2024.

Download PDF Details
Other papers | 2024

Biogas4Industry

Biotechnological Methane from Industrial Waste Waters

Neubauer M, Heiling A, Ludwig K, Huemer S, Marijanovic A, Prall K, Drosg B. Biogas4Industry. Centre's Day 2024.

Download PDF Details
Peer reviewed papers | 2024

Bubbling fluidized bed co-combustion and co-gasification of sewage sludge with agricultural residues with a focus on the fate of phosphorus

Hannl TK, Skoglund N, Priščák J, Öhman M, Kuba M. Bubbling fluidized bed co-combustion and co-gasification of sewage sludge with agricultural residues with a focus on the fate of phosphoru. Fuel. 1 February 2024. 357:129822

External Link Details

In this work, the fate of the ash-forming elements during bubbling fluidized bed combustion and gasification of P-rich sewage sludge (SS) and mixtures with either Si-K-rich wheat straw (WS) or K-Ca-rich sunflower husks (SH) were investigated. The focus of the study was assessing the feasibility of using fuel blends in fluidized bed systems and potential P recovery from the resulting ashes. The used fuels were pure SS and mixtures including 90 wt.% WS (WSS) and 85 wt.% SH (SHS). The analyzed operating conditions were combustion (930–960 °C, λ: 1.2–1.5) and gasification (780–810 °C, λ: 0.4–0.7) in a 5 kW bench-scale reactor. Residual ash and char fractions were collected from different parts of the 5 kW bubbling fluidized bed (bed, cyclone, filter) and analyzed by CHN, SEM/EDS, XRD, and ICP-AES.

The conversion of the fuel mixtures achieved a steady state under the used process conditions except for the combustion of WSS, which led to the formation of large bed agglomerates with the bed material. The morphology of ash samples after combustion showed that SS fuel pellets mostly maintained their integrity during the experiment. In contrast, the ash and char particles from fuel mixtures were fragmented, and larger quantities were found in the cyclone, the filter, or on interior reactor surfaces. The fate of P was dominated by crystalline Ca-dominated whitlockites in all ash fractions, partially including K for the fuel mixtures SHS and WSS. 76–81 % of ingoing P was found in the bed residue after combustion and gasification of the SS-fuel. After conversion of the fuel mixtures SHS and WSS, the share was lower at 22–48 %, with larger shares of P in the entrained fractions (25–34 %). The quantity of identified crystalline compounds was lower after gasification than combustion, likely due to the limited interaction of ash-forming elements in the residual CHN matrix. Altogether, the results show that fuel mixtures of sewage sludge with agricultural residues could expand the fuel feedstock and enable P recovery. This may be used in the fuel and process design of upscaled fluidized bed processes or systems employing both combustion and gasification.

Peer reviewed papers | 2024

Challenges, progress, and future perspectives for cyanobacterial polyhydroxyalkanoate production

Rueda E, Gonzalez‑Flo E, Mondal S, Forchhammer K, Arias DM, Ludwig K, Drosg B, Fritz I, Gonzalez‑Esquer CR, Pacheco S, García J. Challenges, progress, and future perspectives for cyanobacterial polyhydroxyalkanoate production. Reviews in Environmental Science and Biotechnology. 2024: 23 (2): 321 - 350. 10.1007/s11157-024-09689-0

External Link Details

Polyhydroxyalkanoates (PHA) are a promising bio-based alternative to traditional plastics derived from petroleum. Cyanobacteria are photosynthetic organisms that produce PHA from CO2 and sunlight, which can potentially reduce production costs and environmental footprint in comparison to heterotrophic bacteria cultures because (1) they utilize inorganic carbon sources for growth and (2) they do not require intensive aeration for oxygenation. Moreover, supplementing precursors such as propionate, acetate, valerate, etc., can be used to obtain various copolymers with plastic customizable properties in comparison to the classical homopolymers, such as polyhydroxybutyrate, PHB. This critical review covers the latest advances in PHA production, including recent discoveries in the metabolism interplay between PHA and glycogen production, and new insights into cultivation strategies that enhance PHA accumulation, and purification processes. This review also addresses the challenges and suggests potential solutions for a viable industrial PHAs production process.

Other Publications | 2024

Chemical Looping for efficient biomass utilization

Schulze K, Kienzl N, Steiner T, Martinie S, Priscak J. Chemical Looping for efficient biomass utilization. Centre's Day 2024.

Download PDF Details
Peer reviewed papers | 2024

Chemical looping of synthetic ilmenite, Part I: Addressing challenges of kinetic TGA measurements with H2

Steiner T, Schulze K, Kienzl N, Pauritsch M, Hacker V, Bock S, Abad A, Scharler R, Anca-Couce A. Chemical looping of synthetic ilmenite, Part I: Addressing challenges of kinetic TGA measurements with H2. Fuel. 15 July 2024. 368:131528.

External Link Details

Reliable experimental data and models are required to better understand and design chemical looping processes with oxygen carrier materials like ilmenite. A dubious variability of suggested kinetics for similar oxygen carrier materials has been presented in the literature. Part I of this work focuses on thermogravimetric analysis (TGA) of gas–solid kinetics and addresses several of its challenges, which are possible reasons behind such deviations. The reduction of synthetic ilmenite (60 mass% Fe2O3 +40 mass% TiO2) powder with H2 in a TGA system was investigated for this purpose.
Multiple steps were necessary to overcome mass transfer limitations during the measurements: (i) small sample masses down to 1.6 mg, (ii) high gas flow rates, (iii) a suitable sample carrier and (iv) proper sample dispersion on the sample carrier. Three types of sample carriers (crucible, basket and plate) were tested; the plate showed the best performance overall. It was alarming that an exemplary increase in sample mass from 1.6 to 3 mg, which was still significantly lower than all other studies reviewed, already introduced a noticeable influence of diffusion. Isothermal (650–950 °C, 17–50 vol% H2) and nonisothermal parameter studies were conducted and yielded vastly different isoconversional activation energies. A computational fluid dynamics (CFD) study of the TGA system suggested considerable axial dispersion of H2 influencing the initial conversion period.
These findings help to assess the reliability of kinetic studies and guide towards diffusion-free, kinetic measurements. The results will be used for model development in part II.

Peer reviewed papers | 2024

CO2 capture costs of chemical looping combustion of biomass: A comparison of natural and synthetic oxygen carrier

Fleiß B, Priscak J, Hammerschmid M, Fuchs J, Müller S, Hofbauer H. CO2 capture costs of chemical looping combustion of biomass: A comparison of natural and synthetic oxygen carrier. Jouernal of Energy Chemistry. May 2024.92:296-310.

External Link Details

Chemical looping combustion has the potential to be an efficient and low-cost technology capable of contributing to the reduction of the atmospheric concentration of CO2 in order to reach the 1.5/2 °C goal and mitigate climate change. In this process, a metal oxide is used as oxygen carrier in a dual fluidized bed to generate clean CO2 via combustion of biomass. Most commonly, natural ores or synthetic materials are used as oxygen carrier whereas both must meet special requirements for the conversion of solid fuels. Synthetic oxygen carriers are characterized by higher reactivity at the expense of higher costs versus the lower-cost natural ores. To determine the viability of both possibilities, a techno-economic comparison of a synthetic material based on manganese, iron, and copper to the natural ore ilmenite was conducted. The synthetic oxygen carrier was characterized and tested in a pilot plant, where high combustion efficiencies up to 98.4% and carbon capture rates up to 98.5% were reached. The techno-economic assessment resulted in CO2 capture costs of 75 and 40 €/tCO2 for the synthetic and natural ore route respectively, whereas a sensitivity analysis showed the high impact of production costs and attrition rates of the synthetic material. The synthetic oxygen carrier could break even with the natural ore in case of lower production costs and attrition rates, which could be reached by adapting the production process and recycling material. By comparison to state-of-the-art technologies, it is demonstrated that both routes are viable and the capture cost of CO2 could be reduced by implementing the chemical looping combustion technology.

Peer reviewed papers | 2024

Comparison of single particle models: simplified layer model and detailed volumetric model for biomass, chemical looping and metal oxide conversion processes

Steiner T, Schulze K, Scharler R, Anca-Couce A. Comparison of single particle models: simplified layer model and detailed volumetric model for biomass, chemical looping and metal oxide conversion processes. Chemical Engineering Journal. 15 May 2024. 488:150993

External Link Details

Various single particle models to describe the conversion of porous solids with gaseous reactants are available in the literature. It is, therefore, not obvious which models should be selected for specific problems and applications. This work focuses on two popular types of particle models: the volumetric model (VM) and the layer model (LM). Different variations of the layer model were considered: the standard layer model, which is similar to common shrinking core models, and an extended layer model, which solves inherent problems of the shrinking core approach by replacing surface reactions with volumetric reactions. For the first time, all these models were benchmarked together regarding prediction quality and computational cost for relevant applications: gasification and oxidation of biochar, reduction of nickel oxide and oxidation of magnetite. These cases covered a wide range of Thiele moduli and Biot numbers. The volumetric model reliably predicted the conversion for all cases considered. Its computational effort was, however, significantly higher than for the layer models. Suitable reactions kinetics in combination with heat of reaction and pore diameters were integral to prediction accuracy. Char oxidation, having a high Thiele modulus, could be described suitably by the standard layer model and the extended layer model, when it accounted for the residual ash layer. Char gasification and nickel oxide reduction had moderate Thiele moduli, rendering the standard layer model unsuitable in the general case. The extended layer model overcomes these limitations due to its volumetric reaction approach. All layer models showed inferior temperature predictions for biochar gasification and magnetite oxidation owing to their lower spatial resolution compared to the volumetric model. Additional, possible problems for layer models were addressed.

Reports | 2024

Development of outlook for the necessary means to build industrial capacity for drop-in advanced biofules

Final Report

External Link Details

Biofuels are crucial for reducing emissions in the transport sector, contributing significantly to the objectives of the Fit for 55 package and climate neutrality goals. This role is anticipated to grow in the future as advanced biofuels become increasingly accessible. This expansion will be driven by the full commercial-scale development of technologies, processes, and value chains, supported by ambitious policies and sector-specific targets that will encourage their deployment.

Studien | 2024

Economic and environmental assessment of the retrofitting of a first-generation ethanol Plant

Susmozas A, Matschegg D, Davidis B, Spekreijse J, Tzelepi V, Kourkoumpas D, Alonso J, Coto B, Iglesias R. Economic and environmental assessment of the retrofitting of a first-generation ethanol plant. Biomass Conversion and Biorefinery.20 June 2024

External Link Details

Bioenergy retrofitting may be a short-term strategy to promote the transition from first-generation to advanced bioethanol, as it could improve the cost-competitiveness of the latter. In addition, this strategy could also extend the operational lifetime of first-generation ethanol plants, whose production is restricted by the current European renewable energy regulations. Therefore, this work evaluates two retrofitting scenarios of an existing corn-based first-generation ethanol facility located in Spain from an economic and environmental perspective. In the first case (scenario 1), advanced bioethanol was produced using industrial waste streams included in the Renewable Energy Directive II. The second approach (scenario 2) involves the integration of second-generation technology into the existing first-generation facility. The economic analysis shows that scenario 1 presents a low capital expenditure (CAPEX, €100,000), as it only requires the installation of an industrial waste storage tank. Although, in terms of net present value (NPV), the CAPEX of scenario 2 is higher. It obtains better profitability reaching an NPV of approximately €25,610,000. The environmental assessment identified natural gas consumption as the main contributor to the overall score of the global warming impact category. Consequently, the increased energy demand of the retrofit scenarios, mainly linked to second-generation technology, has a negative impact in terms of greenhouse gas emissions. Therefore, a key aspect to improve the environmental performance of these scenarios would be the replacement of natural gas with a more sustainable alternative, such as bio-based gases.

Peer reviewed papers | 2024

Economic and environmental assessment of the retrofitting of a first‑generation ethanol plant

Susmozas A, Matschegg D, Davidis B, Spekreijse J, Tzelepi V, Kourkoumpas DS, García Alonso JM, Coto B, Iglesias R. Economic and environmental assessment of the retrofitting of a first‑generation ethanol plant. Biomass Conversion and Biorefinery. 20 June 2024. doi: 10.1007/s13399-024-05826-5

External Link Details

Bioenergy retrofitting may be a short-term strategy to promote the transition from first-generation to advanced bioethanol, as it could improve the cost-competitiveness of the latter. In addition, this strategy could also extend the operational lifetime of first-generation ethanol plants, whose production is restricted by the current European renewable energy regulations. Therefore, this work evaluates two retrofitting scenarios of an existing corn-based first-generation ethanol facility located in Spain from an economic and environmental perspective. In the first case (scenario 1), advanced bioethanol was produced using industrial waste streams included in the Renewable Energy Directive II. The second approach (scenario 2) involves the integration of second-generation technology into the existing first-generation facility. The economic analysis shows that scenario 1 presents a low capital expenditure (CAPEX, €100,000), as it only requires the installation of an industrial waste storage tank. Although, in terms of net present value (NPV), the CAPEX of scenario 2 is higher. It obtains better profitability reaching an NPV of approximately €25,610,000. The environmental assessment identified natural gas consumption as the main contributor to the overall score of the global warming impact category. Consequently, the increased energy demand of the retrofit scenarios, mainly linked to second-generation technology, has a negative impact in terms of greenhouse gas emissions. Therefore, a key aspect to improve the environmental performance of these scenarios would be the replacement of natural gas with a more sustainable alternative, such as bio-based gases.

Other Publications | 2024

ELLIPSE - Valorising Pulp and Paper Residues

Pummer R, Bauer L, Neubauer M, Prall K, Drosg B. ELLIPSE - Valorising Pulp and Paper Residues

Download PDF Details
Other papers | 2024

Energy Knowledge Transfer To The Next Generation - Project "Energie und I"

Oberbauer C, Enigl M, Aigenbauer S. Energy Knowledge Transfer To The Next Generation - Project "Energie und I". Centre's Day 2024

Download PDF Details
Other Publications | 2024

Environmental impact of the Sustainable Aviation Fuel FT-SPK from biomass gasification

Matschegg D, Fuhrmann M, Bacovsky D, Strasser C, Stern T. Environmental impact of the Sustainable Aviation Fuel FT-SPK from biomass gasification. Centre's Day 2024

Download PDF Details
Other Publications | 2024

Estimation and Prediction of the Drying State of a Herb Drying Process

Dovjak M, Niederwieser H, Staudt S, Hollenstein C, Gölles M, Gruber P, Rotter N, Pfleger J, Weiß W. Estimation and Prediction of the Drying State of a Herb Drying Process. Centre's Day 2024

Download PDF Details
Other Publications | 2024

Evaluating the economic performance of wood-based industries

Fuhrmann M, Dißauer C, Strasser C. Evaluating the economic performance of wood-based industries. Centre's Day 2024.

Download PDF Details
Other Publications | 2024

Evaluation of dry fermentation as a preliminary stage for composting organic waste (W2C&G)

Ludwig K, Poschmaier-Kamarad L, Binner E, Enigl M, Sonnleitner A, Strasser C, Huber-Humer M, Drosg B. Evaluation of dry fermentation as a preliminary stage for composting organic waste (W2C&G). Centre's Day 2024

Download PDF Details
Reviewed Conference Papers | 2024

Finding a new balance – valid indicators for techno-economic energetic flexibilities

Martin Puster, Kerstin Pfleger-Schopf, Bernd Riederer, Sebastian Dietze and Thomas Kienberger, „Finding a new balance – valid indicators for techno-economic energetic flexibilities”, in Conference Proceedings NEFI NEW ENERGY FOR INDUSTRY 2024, MuseumsQuartier, Vienna, Okt. 2024. pp. 49-51, [Online]. doi: 10.5281/zenodo.13985900.

External Link Details

Industry is not only a big primary emitter of CO2 itself, but also a big consumer of electricity with a share of about 43% of electricity consumption in Austria in 2023. Therefore, providing the future electrical grid with storage capacities will be a big opportunity for industrial facilities, as industry has a unique capability of load management due to its diversity compared to households or other services. While major scientific projects have investigated this potential, there is a lack of incentives for industrial plants at various levels to foster the balancing of electricity supply.

In this paper we provide an overview regarding the state of research and the obstacles we need to overcome to close the implementation gap. We expand the state-of-the-art approach of assessing flexibility potentials by not only incorporating technical but also economic and organizational key performance indicators. With the proposed novel assessment strategy, we bridge the gap between top down and bottom-up approaches, aiming to facilitate practical and economically viable demand response measures in energy-intensive industrial processes. Our methodology is demonstrated through a case study based on real life industry application, with results validated against literature and expert discussions.

Other Publications | 2024

Fischer Tropsch Reactor

Mathematical model for soft sensor development

Kirsten I, Poms U, Steiner T, Köffler T, Reiter-Nigitz T, Weber G, Gölles M. Fischer Tropsch Reactor. Centre's Day 2024

Download PDF Details
Reviewed Conference Papers | 2024

Flexibilization of industrial energy systems by optimization-based demand side management

Bernd Riederer, Valentin Kaisermayer, Sebastian Dietze, Daniel Muschick, Martin Puster, Kerstin Pfleger-Schopf and Markus Gölles, „Flexibilization of industrial energy systems by optimization-based demand side management”, in Conference Proceedings NEFI NEW ENERGY FOR INDUSTRY 2024, MuseumsQuartier, Vienna, Okt. 2024. pp. 36-38, [Online]. doi: 10.5281/zenodo.13985900.

External Link Details

The increasing share of volatile energy sources as well as variable demands provide challenges for the electrical power grid. To counteract these instabilities a balance between supply and demand needs to be established. In industrial processes, this can be achieved by coordinating the energy production with local storage and demand. Specifically, the optimized scheduling of batch production processes can avoid peak loads. A holistic approach for the control of industrial energy systems and production processes is needed to use this flexibility. This contribution presents an extension to a modular framework for optimization-based, predictive supervisory control of multi-energy systems providing the possibility to incorporate batch production processes, and a first study showing that shifting production processes can result in a more resource- and cost-efficient process.

Peer reviewed papers | 2024

Gaussian Process Regression-Based Control of Solids Circulation Rate in Dual Fluidized Bed Gasification

Stanger L, Bartik A, Binder M, Schirrer A, Jakubek S, Kozek M. Gaussian Process Regression-Based Control of Solids Circulation Rate in Dual Fluidized Bed Gasification. IEEE Access. 2024.23:138535 - 138546.

External Link Details

In dual fluidized bed (DFB) gasification, the solids circulation rate is critical as it determines the amount of char and heat transported between the interconnected reactors. In DFB plants, multiple control inputs are typically available to control the solids circulation rate, resulting in an over-actuated system. We propose a modeling and control method based on Gaussian process regression, a technique that provides a measure of confidence in the model prediction. The availability of redundant control inputs is resolved by explicitly incorporating the prediction confidence information into the control algorithm to drive the process in regions of low model uncertainty. To address plant-model mismatches, a disturbance model is employed, and an extended Kalman filter is used to estimate both system and disturbance states, enabling offset-free tracking of constant references. Modeling and closed-loop simulation results for both a 100 kW and a 1 MW DFB gasification plant demonstrate the applicability of the method to different plants. Experimental results are presented for the 100 kW plant, demonstrating the successful control of the circulation rate by the proposed algorithm.

Other Publications | 2024

Green carbon as coal substitute in the blast furnace

Deutsch R, Feilmayr C, Kienzl N, Pfeilstecher M, Schulze K, Stocker H. Green carbon as coal substitute in the blast furnace. Centre's Day 2024

Download PDF Details
Other Publications | 2024

Green Fuel and Chemicals

Köffler T, Lang B, Egger A, Fürsatz K, Hofbauer H, Müller S, Strasser C, Sanchez-Sanchez M, Pfeifer C, Pröll T, Rauch R, Weber G. Green Fuel and Chemicals. Centre's Day 2024

Download PDF Details
Other Publications | 2024

Investigation of main elemental recoveries during pyrolysis of agricultural and wood-based feedstocks

Moser K, Wopienka E, Pfeiffer C. Investigation of main elemental recoveries during pyrolysis of agricultural and wood-based feedstocks. Centre's Day 2024.

26 september 2024

Download PDF Details
Other Publications | 2024

IoT Infrastructure for the Syngas Platform Vienna with Real-Time KPI Computations

Shabatska D, Kaisermayer V, Poms U, Reiter-Nigitz T, Mitterlehner J, Kolm M, Artl S, Gölles M. IoT Infrastructure for the Syngas Platform Vienna with Real-Time KPI Computations

Download PDF Details
Other Publications | 2024

KLAR (Wirtschaftsagentur Wien - Zero Emission Cities)

Brandstätter G, Hochstöger D, Fuhrmann M, Matschegg D, Egger S, Long A, Strasser C, Fürsatz K. KLAR. Centre's Day 2024

Download PDF Details
Other papers | 2024

Mainstreaming Gender and Diversity at BEST

Enigl M. Mainstreaming Gender and Diversity at BEST. Centre's Day 2024

Download PDF Details
Other Publications | 2024

Microgrid Research Laboratory - esmperimental validation of energy management technologies

Aigenbauer S, Liedtke P, Maier C, Oberbauer C, Sturmlechner R, Zillner L, Haas R. Microgrid Research Laboratory - experimental validation of energy management technologies. Centre's Day 2024.

Download PDF Details
Conference presentations and posters | 2024

Model-Based Control of Absorption Heat Pumping Devices – General Approach and Exemplary Application to Solar Cooling Systems

Staudt S, Unterberger V, Muschick D, Kaisermayer V, Schwendt M, Gölles M. Model-Based Control of Absorption Heat Pumping Devices – General Approach and Exemplary Application to Solar Cooling Systems. 3rd International Sustainable Energy Conference: ISEC 2024. Graz, 10/04/2024. Oral presentation.

Details

Absorption heat pumping devices (AHPDs, comprising heat pumps and chillers) can provide heating and cooling in a resource-efficient manner. However, their perceived complexity has limited their widespread application. This contribution shows how mathematical models, systematically capturing this complexity, can be used for model-based control of AHPDs (on the device-level for model-predictive or state feedback control and on the system-level for optimisation-based energy management systems) to facilitate their integration into energy systems, and discusses an exemplary application to solar cooling systems.

Other Publications | 2024

Model-based control of large-scale solar thermal plants

Poms U, Reiter-Nigitz T, Dovjak M, Staudt S, Unterberger V, Heric S, Poier H, Gölles M. Model-based control of large-scale solar thermal plants. Centre's Day 2024

Download PDF Details
Peer reviewed papers | 2024

Numerical investigation of reaction mechanisms on NOX emissions from biomass combustion with enhanced reduction

Eßl M, Scharler R, Schulze K, Anca-Couce A. Numerical investigation of reaction mechanisms on NOX emissions from biomass combustion with enhanced reduction. Biomass and Bioenergy. 2024.191:107441

External Link Details

The present study examines the applicability of reaction kinetic mechanisms for predicting NOX emissions from biomass furnaces. These mechanisms are essential for numerical optimization of new innovative combustion technologies and therefore must be computationally affordable and provide reasonable accuracy in predicting NOX emissions. The selection of a suitable mechanism from literature is the goal of this work. The numerical investigations carried out utilized chemical reaction kinetic simulations with continuous stirred tank reactor networks. First, the predictions of a detailed benchmark mechanism are compared to experimental data and analyzed with regard to temperature, air-to-fuel equivalence ratio, residence time and producer gas composition. Then, various hybrid and reduced mechanisms are compared with the benchmark mechanism. The investigation showed a good agreement on the trends of NOX emissions from the detailed mechanism and measurements. The detailed mechanism can therefore be employed to find optimal operation windows in terms of temperature, air-to-fuel equivalence ratio and residence time. Benchmarking of the hybrid and reduced mechanisms showed large differences between the mechanisms. In conclusion, only one reduced mechanism is considered suitable for application in a full-scale 3D CFD simulation, which will be investigated in future studies.

Conference presentations and posters | 2024

On efficient solar district heating systems – status and latest results

Unterberger V, Lichtenegger K, Berberich M, Feierl L, Moser M, Beurskens L, Byström J, Deutsch C, Gölles M. On efficient solar district heating systems – status and latest results. IEA SHC Task 68 - Efficient Solar District Heating Systems. 3rd International Sustainable Energy Conference: ISEC 2024. Graz, 10-11/04/2024. Poster presentation.

Download PDF Details

Heat is still the largest energy end-use, accounting for about 50% of global final energy consumption in 2022 and contributing to 40% of global carbon dioxide (CO2) emissions. Regarding the heat supply of buildings, district heating plays an important role and is well-established in many countries. However, most of the district heating networks worldwide are still operated with supply temperatures of 70-120°C (medium-high temperature) often produced by caloric power plants. Solar district heating (SDH) systems can be a valuable alternative to decarbonize these systems. How this can be done most efficiently is investigated within the task 68 Efficient Solar District Heating Systems of the International Energy Agency (IEA) from the technology cooperation program – solar heating and cooling (SHC). This contribution presents the latest results of the task regarding comparison of different collector technologies, important digitalization aspects, analysis of available funding schemes and latest efficient SHD installations.

Peer reviewed papers | 2024

On the Applicability of Iron-Based Oxygen Carriers and Biomass-Based Syngas for Chemical Looping Hydrogen Production

Steiner T, von Berg L, Anca-Couce A, Schulze K. On the Applicability of Iron-Based Oxygen Carriers and Biomass-Based Syngas for Chemical Looping Hydrogen Production. Energy & Fuels. 2024

External Link Details

The chemical looping hydrogen (CLH) production process typically uses iron-based oxygen carrier materials and can provide hydrogen with high purity. Chemical looping is particularly attractive when renewable fuels like syngas from biomass gasifiers are used. This work provides a novel assessment of the possible thermodynamic and kinetic limitations for iron-based oxygen carriers in CLH fueled by biomass-based syngas, with a detailed study employing synthetic ilmenite (Fe2O3 + TiO2). Its phase diagram with H2/H2O- or CO/CO2-mixtures was compared to the typical Baur–Glaessner diagram for iron oxides. Thermogravimetric analyses underlined the necessity to consider TiO2 as a chemically active component for this material, in contrast to the common simplification of inert support materials. The validated phase diagram predicted stringent fuel limitations concerning H2O- or CO2-contents. This was confirmed by feeding a real biomass-based syngas, provided by a lab-scale gasifier, to a fixed bed CLH reactor. It was demonstrated for the H2/H2O-system that removing the oxidizing agent from the feed gas helps to overcome these limitations. Kinetic limitations within the thermodynamic boundaries were investigated using a recently published multiscale model for the H2/H2O-system. The influence of the fuel’s reduction potential on reaction rates was explored to formulate simple, kinetic design criteria. A significant retardation of conversion rate in the vicinity of the equilibrium was indicated, effectively narrowing the feasible composition range. Recommendations for the application of biomass-based syngas with iron-based oxygen carrier materials were provided.

Peer reviewed papers | 2024

On the characteristic polynomial of the dynamic matrix of linear time-invariant multivariable systems in Luenberger's canonical forms

Niederwieser H, Reichhartinger M. On the characteristic polynomial of the dynamic matrix of linear time-invariant multivariable systems in Luenberger's canonical forms. Automatica. April 2024.162:11532

External Link Details

This article presents a general representation of the characteristic polynomial of the dynamic matrix for multivariable systems in Luenberger’s canonical forms. The characteristic polynomial is given by means of the determinant of a polynomial matrix of substantially lower order. Therein, the polynomial coefficients of the single elements are the coefficients of the corresponding blocks of the dynamic matrix. The proposed representation of the characteristic polynomial can be helpful for the design of state-feedback controllers and state observers which is demonstrated by a numerical example.

Other papers | 2024

Optimized Planning of Distributed Multi-Energy-Systems

Oberbauer C, Aigenbauer S, Zillner L, Mair C, Sturmlechner R, Liedtke P, Haas R. Optimized Planning of Distributed Multi-Energy-Systems. Centre's Day 2024.

Download PDF Details
Peer reviewed papers | 2024

Part 1─Impact of Pyrolysis Temperature and Wood Particle Length on Vapor Cracking and Char Porous Texture in Relation to the Tailoring of Char Properties

Maziarka P, Kienzl N, Dieguez-Alonso A, Fierro V, Celzard A, Arauzo PJ, Hedin N, Prins W, Anca-Couce A, Manyà JJ, Ronsse F. Part 1─Impact of Pyrolysis Temperature and Wood Particle Length on Vapor Cracking and Char Porous Texture in Relation to the Tailoring of Char Properties. Energy & Fuels. 6 June 2024. 38 (11): 9751 - 9771. 10.1021/acs.energyfuels.4c00937

External Link Details

Pore size distribution is a key parameter in the performance of biobased pyrolytic char in novel applications. In industrial-scale production, the size of feedstock particles typically exceeds a few millimeters. For such particle sizes, it is a challenge to tailor the final properties of the char based only on the process conditions (experimental and modeling-wise). Pyrolysis studies of single particles larger than a few millimeters provide data sets useful for modeling and optimization of the process. Part 1 of this research focused on the pyrolysis of single particles of beech wood, secondary cracking, and its effect on the char porous texture. It contains a quantitative assessment of the effects of five conversion temperatures (from 300 to 840 °C) and two particle dimensions (Ø8 × 10 mm and Ø8 × 16 mm) on the composition of the pyrolysis vapors and pore morphology of the char. Results from real-time temperature and mass changes are presented along with release profiles of 15 vapor constituents measured by infrared spectroscopy. Furthermore, characterization of the collected bio-oil (using GC-MS/FID) and the textural hierarchical structured char (through N2 and CO2 adsorption, Hg porosimetry, and scanning electron microscopy (SEM)) was performed. Cracking of vapors above 500 °C was compound-specific. The polyaromatic hydrocarbons (PAHs) yield, between 680 and 840 °C, increased 5 times for 10 mm particles and 9 times for 16 mm ones. Besides temperature, PAH yield was suspected to correlate with particle length and PAHs/soot deposition in the micropores. Results showed that the macropores accounted for over 80% of the total pore volume, regardless of the temperature and particle length. Increasing the particle length by 60% caused a reduction in the specific surface area (ca. 15% at 840 °C) of the resulting char, mainly due to a reduction in microporosity. Based on the findings, the production conditions for a specific char application are suggested. The obtained data will be used in Part 2 of this research, devoted to subsequent CFD modeling of the process.

Peer reviewed papers | 2024

Part 2─Tailoring of Pyrolytic Char Properties with a Single Particle CFD Model with a Focus on the Impact of Shrinking, Vapor Cracking, and Char Permeability

Maziarka P, Kienzl N, Dieguez-Alonso A, Prins W, Arauzo PJ, Skreiberg Ø, Anca-Couce A, Manyà JJ, Ronsse F. Part 2─Tailoring of Pyrolytic Char Properties with a Single Particle CFD Model with a Focus on the Impact of Shrinking, Vapor Cracking, and Char Permeability. Energy & Fuels. 6 June 2024. Volume 38 (11): 9772 - 9793. 10.1021/acs.energyfuels.4c00942

External Link Details

The prediction of the structural properties of biobased carbonaceous materials of pyrolytic origin (chars) with only base feedstock properties and process conditions still poses a challenge that hinders char tailoring for novel applications. CFD modeling of single biomass particle conversion can help solve this issue since it allows for the quantification of relations between parameters that are difficult to measure. A model for char tailoring must include a validated representation of the structural changes coupled to all other relevant phenomena occurring during conversion. Part 2 of this study focuses on finding the description of the mentioned aspects to achieve the highest precision of prediction of the structural changes in char by a CFD model. The investigation in Part 2 is composed of three cases focused on accurate description and prediction of (1) bulk density and porosity, (2) secondary vapor reactions on yields and soot formation, and (3) permeability, as well as the outflux and conversion of evolved vapors. The experimental results from Part 1 and the literature data were used to find appropriate descriptions of phenomena and assess the accuracy of the model. The model results indicate that for both particle lengths (10 and 16 mm), a high accuracy of prediction of base structural parameters was achieved. The average prediction error for temperatures between 400 and 840 °C of bulk density was 31 ± 15 kg/m3, and the porosity was 1.8 ± 1.1 vol %. The results also show a low error in the prediction of bulk product yields (dry basis) over the mentioned temperature range, which were: for char 2.8 ± 1.1 wt %, for the condensable fraction 6.5 ± 3.3 wt %, and for the pyrolysis gas 4.1 ± 1.9 wt %. The distribution of secondary char formation was found to be nonuniform below 500 °C. The changes in permeability had a minor influence on the vapor outflux but a non-negligible effect on the soot formation, especially at 840 °C. The results indicate a need for further improvement of the primary degradation model to increase the accuracy of the effect of soot formation on the char structure.

Other Publications | 2024

Piloting biochar feedstock conversion - 5 potential value chains for bio-based material

Schwabl M, Sedlmayer I, Carlon E, Moser K, Schwarz M. Piloting biochar feedstock conversion - 5 potential value chains for bio-based material. Centre's Day 2024.

Download PDF Details
Other papers | 2024

Plastic residues co-gasification in fixed bed systems

Martini S, Wopienka E, Gollinger T, Sarsteiner J, Kienzl N. Plastic residues co-gasification in fixed bed systems. Centre's Day 2024

Download PDF Details
Peer reviewed papers | 2024

Potential of user training for reducing emissions of firewood stoves

Sturmlechner R, Schmidl C, Klauser F, Kirchsteiger B, Kasper-Giebl A. Potential of user training for reducing emissions of firewood stoves.Atmospheric Environment X. 2024.24:100287.

External Link Details

Emissions from wood-burning stoves contribute to local air pollution. However, it is difficult to determine the real emissions from such stoves, especially due to unknown user behaviour, which can have a large impact on emissions. In this study, the low-cost emission reduction measure “user training” was evaluated to determine its emission reduction potential on firewood stoves. Two sets of tests were carried out. First, a field measurement campaign was conducted in Styria (Austria) with four wood stoves, where gaseous and particulate emissions were measured before and after a user training on optimised heating behaviour (e.g. ignition mode, fuel properties and placement in the combustion chamber, air supply). Gaseous emissions (carbon monoxide – CO, organic gaseous compounds – OGC) were measured continuously, while particulates were measured in batches, in undiluted and hot as well as in diluted and cooled flue gas in parallel with a specific field measurement setup. In addition, particle filters were analysed to quantify the concentration of the carcinogenic compound benzo(a)pyrene (BaP). Second, user training workshops were conducted. These tests had a simple measurement setup in order to increase the number of tests. Thus, only CO emissions were evaluated.

The results show that real life emissions in the field are high and have a high variability compared to laboratory tests and official type test results. However, user training showed a significant reduction of CO, OGC, TSP and BaP emissions of 42%, 57%, 45% and 76% (median), respectively. In addition, TSPsum (sum of hot and cooled particle emission samples) emissions decreased by 39% (median) after user training. The relative reduction rates of all batches show that the highest emission reduction potential was identified for BaP, with a reduction rate of up to 97%. The results of the workshop tests confirmed the high variability in user behavior and the range for the emission reduction potentials, with a median CO reduction of 41%.

The emission reduction potential of the user training measure is comparable to state-of-the-art technological measures such as electrostatic precipitators and catalysts. However, these measures are costly and require a high level of technical sophistication. User training, on the other hand, is relatively cheap, easy to implement and suitable for all users. Of course, there is some risk that trained end-users will revert to their old habits, leading to higher emissions again. Therefore, regular training may be necessary to maintain the higher level of performance. As we did not assess this aspect in our work, further research would be needed to prove this theory.

Other Publications | 2024

Predictions of NOx-emissions in combustion processes using chemical reactor networks

Krainz M, Essl M, Schulze K. Predictions of NOx-emissions in combustion processes using chemical reactor networks. Centre's Day 2024

Download PDF Details
Other Publications | 2024

Predictive Building Energy Management with User Feedback in the Loop

Kaisermayer V, Muschick D, Gölles M, Horn M. Predictive Building Energy Management with User Feedback in the Loop. Centre's Day 2024.

Download PDF Details
Other Publications | 2024

Pyrolysetechnologien in Europa

Technologieübersicht mittelschneller Pyrolyse für dezentrale Anwendungen, für kleine und mittlere Unternehmen und für die Kreislaufwirtschaft

Klauser F, Schwarz M, Schwabl M, Wopienka E, Fuhrmann M, Dissauer C. Pyrolysetechnologien in Europa, BMK.14/2024

External Link Details

Pyrolyse ist ein althergebrachtes Verfahren, das bereits vor Jahrtausenden zur Herstellung von Kohle praktiziert wurde. Bestrebungen nach Unabhängigkeit von fossilen Ressourcen und klimaneutralen sowie kreislaufwirtschaftlichen Wertschöpfungsketten, führen aktuell zu deutlich steigendem Interesse an dieser Technologie. Durch vielseitige verfahrenstechnische Ausgestaltungsmöglichkeiten stellt die Pyrolyse eine potenzielle Schlüsseltechnologie für verschiedene zum Teil hoch spezifische Anwendungen für stoffliche und energetische Prozessketten dar. Diese Vielfalt an Möglichkeiten resultiert jedoch gleichzeitig in einer hohen Komplexität, die es erschwert einen Überblick über angebotene Anlagen zu bekommen.

Ziel dieser Studie ist es, Informationen vielfältiger Systeme in eine vergleichbare Form zu bringen und dadurch eine Übersicht für Interessierte zu ermöglichen. Der Aufwand der Informationsbeschaffung als initialer Schritt für Umsetzungen soll dadurch reduziert werden. Hierdurch soll zur Realisierung regionaler Pyrolyseprojekte als Bestandteil kreislaufwirtschaftlicher Stoffnutzungskonzepte beigetragen werden.

Peer reviewed papers | 2024

Release of N-containing compounds during pyrolysis of milk/dairy processing sludge – Experimental results and comparison of measurement techniques

Kwapinska M, Sommersacher P, Kienzl N, Retschitzegger S, Lagler J, Horvat A, Leahy JJ, Release of N-containing compounds during pyrolysis of milk/dairy processing sludge – Experimental results and comparison of measurement techniques. Journal of Analytical and Applied Pyrolysis.2024_178:10639. 10.1016/j.jaap.2024.106391

External Link Details

A dried dairy processing sludge (sludge from wastewater treatment of an effluent from a milk processing plant) was pyrolysed in a single-particle reactor at different temperatures from 400 °C to 900 °C. NH3 and HCN were measured online and offline by means of FTIR as well as by cumulative sampling in impinger bottles (in 0.05 M H2SO4 and 1 M NaOH, respectively) and analysed by photometric method. NO and NO2 were measured online using a nitric oxide analyser while N2O was measured by FTIR. Nitrogen (N) in the sludge and in the remaining char, char-N, was determined. Moreover, tar content in pyrolysis gas was measured and tar-N was determined. The results with respect to N mass balance closure are discussed. The different measurements techniques are compared. For pyrolysis at 520 ℃ and 700 ℃ nitrogen in the gas phase was mainly contained as N2 (36 % and 40 % respectively), followed by NH3 (15 % and 18 %), tar-N (10 % and 9 %), HCN (1 % and 3 %), NO (1 %) and NO2 (0.2 %). The dairy processing sludge has very specific properties with organic-N present predominantly as proteins and a high content of inherent Ca. These characteristics affected the distribution of N. The amount of char-N was higher while the amount of tar-N lower than for sewage sludge from literature, at comparable pyrolysis temperature.

Other Publications | 2024

Social Sciences and Huminaties (SSH) at BEST

Enigl M, Dißauer C, Matschegg D, Sonnleitner A, Strasser C. Social Sciences and Humanities (SSH) at BEST. Centre's Day 2024.

Download PDF Details
Other Publications | 2024

Supervisory control of gaseous hydrogen components in multi-energy systems

Riederer B, Kury P, Kaisermayer V, Muschick D, Deyab A, Jagiello T, Aggarwal M, Sartory M, Pertl P, Albert C, Gölles M. Supervisory control of gaseous hydrogen components in multi-energy systems. Centre's Day 2024

Download PDF Details
Other Publications | 2024

SuSNG

Egger A, Huber M, Pröll T, Benedikt F, Karl J, Müller S, Bartik A, Hofbauer H, Kuba M, Hannl T. SuSNG. Centre's Day 2024.

Download PDF Details
Peer reviewed papers | 2024

Tar conversion and recombination in steam gasification of biogenic residues: The influence of a countercurrent flow column in pilot- and demonstration-scale

Huber M, Benedikt F, Karel T, Binder M, Hochstöger D, Egger A, Fürsatz K, Kuba M. Tar conversion and recombination in steam gasification of biogenic residues: The influence of a countercurrent flow column in pilot- and demonstration-scale. Fuel. 15 May 2024. 364:131068

External Link Details

First experiments with biogenic residues and a plastic-rich rejects and woody biomass blend were conducted in an advanced 1 MW dual fluidized bed steam gasification demonstration plant at the Syngas Platform Vienna. Wood chips, bark, forest residues, and the plastic-rich rejects and woody biomass blend were tested and the tar composition was analyzed upstream and downstream of the upper gasification reactor, which is designed as a high-temperature column with countercurrent flow of catalytic material. Each feedstock was gasified with olivine as bed material in demonstration scale and is compared to the gasification of softwood pellets with olivine and limestone in pilot scale. A reduction in tar content was observed after countercurrent column for all feedstocks. However, a shift in tar species occurred. While styrene, phenol, and 1H-indene were predominant upstream, naphthalene and polycyclic aromatic hydrocarbons (PAHs) were the prevailing tar species downstream the countercurrent column. Hence, an increase of i.e. anthracene, fluoranthene, and pyrene from the upstream concentration was observed. For pyrene, up to twice the initial concentration was measured. This recombination to PAHs was observed for all feedstocks in demonstration- and pilot-scale. The only exception occurred with limestone as bed material, characterized by a higher catalytic activity in comparison to the typically used olivine. In the perspective of the integrated product gas cleaning, tar with higher temperature of condensation are separated more efficiently in the installed scrubbing unit. Hence, the recombination facilitates an overall decline of tar content after the gas cleaning.

Other Publications | 2024

The Role of Liquid Biofuels in Accelerating the Sustainble Energy Transition

External Link Details

Sustainable liquid biofuels are fundamental for decarbonizing the transportation
sector. Biofuels offer a viable, economical, and environmentally sustainable alternative
to fossil fuels, serving as a bridge to future mobility solutions like electromobility and
hydrogen, which have longer development timelines. They improve air quality, public
health, and contribute to agricultural and economic development, enhancing energy
diversification, security, and leveraging each country's comparative advantages. The
main challenges for the continued development of biofuels are the absence of an
international standard, coordination and certification methodologies, lack of regulations
in some countries and the subsidies to fossil fuels. The authors of this policy brief
recommend that the G20 and the international community strengthen regulatory
frameworks for sustainable biofuel use in land transportation, standardize and harmonize
GHG reduction standards and certification mechanisms, and develop common regional
and national policies to advance the production and consumption of new biofuels for
sectors such as aviation and maritime transportation. An analysis1 of biofuels
implementation in emerging markets of Africa, Asia, and Latin America shows that
meeting 25% blending targets requires only 1–7.8% of their total land area, achieving
substantial GHG reductions. Favorable climatic conditions for biomass production in
these countries and the low greenhouse gas impact of international freight underscore the
benefits of global biofuel trade, highlighting the urgent need for widespread adoption to
accelerate decarbonization efforts.

Other Publications | 2024

Waste2Value-LevelUp!

Hochstöger D, Binder M, Egger A, Fürsatz K, Hofbauer H, Huber M, Müller S, Öhman M, Pfeifer C, Pröll T, Skoglund N, Kuba M. Waste2Value-Lebelup!

Download PDF Details
Other Publications | 2023

Act4Value - Actors for innovative and regional bio residue valorization

Sedlmayer I, Wopienka E. Act4Value - Actors for innovative and regional bio residue valorization. BEST Center Day. 28 June 2023

Download PDF Details

A drastic reduction in the consumption of fossil resources and efficient use are key factors in limiting the further progression of climate change. Cascading use and recycling of residues in the sense of bioeconomy and circular economy are essential. Thermochemical or microbiological conversion can produce various intermediates and endproducts (e.g. biochar, basic chemicals, bioenergy) from biogenic residues. Implemented decentrally, such concepts can reduce transportation efforts, increase the degree of self-sufficiency with raw materials, increase regional added value creation and close (preferably regional) material and energy cycles.

Other Publications | 2023

Advanced Control ot the Generated Steam in a Municipal Waste Incineration Plant

Niederwieser H, Jäger F, Kirnbauer F, Gölles M. Advanced Control ot the Generated Steam in a Municipal Waste Incineration Plant. BEST Center Day. 28 June 2023

Download PDF Details

In modern waste management, the energetic utilization of waste is an important key technology. On the one hand, it allows the waste to be disposed of in an environmentally friendly manner and, on the other hand, makes it possible to reduce the use of other controversial energy sources, such as nuclear fission or fossil fuels. However, the efficient and clean incineration of waste is a challenging task due to the strong inhomogeneity of the waste.

Other Publications | 2023

Alps4GreenC: Implementation pathways for sustainable Green Carbon production in the Alpine Region

Carlon E, Moser K, Seldmayer I, Klauser F. Alps4GreenC: Implementation pathways fpr sustainable Green Carbon production in the Alpine Region. BEST Center Day. 28 June 2023

Download PDF Details

The Alpine Region is characterized by a high density of biomass processing and conversion plants. Alps4GreenC sets the scene for transnational utilization of biomass residues in biochar-based value chains. The project aims at:

  • Researching opportunities for conversion of biomass residues with focus on biochar production.
  • Increasing awareness of citizens, plant owners, policy makers and all involved stakeholders.
  • Establishing connection and coordination among Austria, Italy and Slovenia.
Peer reviewed papers | 2023

Anaerobic acidification of pressed sugar beet pulp for mcl-polyhydroxyalkanoates fermentation

Kacanski M, Knoll L, Nussbaumer M, Neuriter M, Drosg B. Anaerobic acidification of pressed sugar beet pulp for mcl-polyhydroxyalkanoates fermentation. Process Biocemistry.2023:131;235-243,

External Link Details

Anaerobic acidification of pressed sugar beet pulp (PSBP) is a promising strategy for the transition towards a circular economy. In this work, volatile fatty acids were produced by anaerobic acidification of PSBP and subsequently converted to mcl-polyhydroxyalkanoates. The results point to mesophilic acidification as superior to thermophilic one. At the same time, the pH regulated at the value of 6.0 showed a decisive advantage over both the pH of 7.0 and the lack of pH regulation. Furthermore, the conditions with a hydraulic retention time (HRT) of 10 days significantly outperformed those with an HRT of 6 days. The best-performing process (mesophilic, pH controlled at 6, HRT of 10 days) was successfully scaled up to a 250 L reactor, reaching a volatile fatty acid (VFA) concentration of up to 27.8 g L-1. Finally, the produced VFA were investigated as feedstock for mcl-PHA producers, Pseudomonas citronellolis and Pseudomonas putida. Both strains grew and produced PHA successfully, with P. citronellolis reaching a biomass of 15.6 g L-1 with 38% of mcl-PHA, while P. putida grew to 15.2 g L-1 with a polymer content of 31%. This study proves that acidified PSBP is a valuable feedstock for mcl-PHA production and an important approach to developing biorefineries.

Peer reviewed papers | 2023

Automatic thermal model identification and distributed optimisation for load shifting in city quarters

Moser A, Kaisermayer V, Muschick D, Zemann C, Gölles M, Hofer A, Brandl D, Heimrath R, Mach T, Ribas Tugores C, Ramschak T. Automatic thermal model identification and distributed optimisation for load shifting in city quarters, International Journal of Sustainable Energy, 2023;42:1, 1063-1078, DOI: 10.1080/14786451.2023.2246079

External Link Details

Buildings with floor heating or thermally activated building structures offer significant potential for shifting the thermal load and thus reduce peak demand for heating or cooling. This potential can be realised with the help of model predictive control (MPC) methods, provided that sufficiently descriptive mathematical models of the thermal characteristics of the individual thermal zones exist. Creating these by hand is infeasible for larger numbers of zones; instead, they must be identified automatically based on measurement data. In this paper an approach is presented that allows automatically identifying thermal models usable in MPC. The results show that the identified zone models are sufficiently accurate for the use in an MPC, with a mean average error below 1.5K for the prediction of the zone temperatures. The identified zone models are then used in a distributed optimisation scheme that coordinates the individual zones and buildings of a city quarter to best support an energy hub by flattening the overall load profile. In a preliminary simulation study carried out for buildings with floor heating, the operating costs for heating in a winter month were reduced by approximately 9%. Therefore, it can be concluded that the proposed approach has a clear economic benefit.

Other Publications | 2023

Automation and Control of Renewable Energy Systems

Gölles M. Automation and Control of Renewable Energy Systems. BEST Center Day. 28 June 2023

Download PDF Details

The Area Automation and Control at BEST - Bioenergy and Sustainable Technologies GmbH focuses on the optimal operation of sustainable biorefinery and renewable energy systems, the optimal interaction of different technologies and systems and the highly automated operation management
by new digital services.

Other Publications | 2023

BIOPOLYCOMP - Biochar for Polymer Composites

Martinie S, Kienzl N, Sarsteiner J. BIOPOLYCOMP - Biochar for Polymer Composites. BEST Center Day. 28 June 2023

Download PDF Details

Char originating from biomass can be used as a sustainable carbon additive in the production of polymer compounds with enhanced characteristics.

Other Publications | 2023

Charactreistics of elemental comositions of biochars derived from agro-residues

Moser K, Wopienka E, Pfeifer C, Kienzl N. Characteristics of elemental compositions of biochars derived from agro-residues. BEST Center Day. 28 June 2023.

Download PDF Details

Over the last decades the general interest in recycling and upcycling technologies heavily grew and in the agricultural sector, it is not different. Lal estimated already in 2005 that 3,8 billion tons of crop residues alone are produced annually
worldwide.

Other Publications | 2023

Chemical Looping for efficient biomass utilization

Schulze K, Kienzl N, Steiner T, Martini S, Priscak J. Chemical Looping for efficient biomass utilization. BEST Center Day. June 2023

Download PDF Details

With respect to the climate objectives Chemical Looping (CL) processes constitute a promising alternative to traditional thermochemical conversion routes. Through the application of solid materials, so-called oxygen carriers (OC), instead of air as oxygen supply, CO2 can be easily separated from the flue gas. By this, biomass can be used for hydrogen production (Chemical Looping Hydrogen, CLH) or it can be burnt without CO2 emissions (Chemical Looping Combustion, CLC).

Peer reviewed papers | 2023

Control-oriented modeling of a LiBr/H2O absorption heat pumping device and experimental validation

Staudt S, Unterberger V, Gölles M, Wernhart M, Rieberer R, Horn M. Control-oriented modeling of a LiBr/H2O absorption heat pumping device and experimental validation. Journal of Process Control. 2023 Aug;128:103024. doi: 10.1016/j.jprocont.2023.103024

External Link Details

Absorption heat pumping devices (AHPDs, comprising absorption heat pumps and chillers) are devices that use thermal energy instead of electricity to generate heating and cooling, thereby facilitating the use of waste heat and renewable energy sources such as solar or geothermal energy. Despite this benefit, widespread use of AHPDs is still limited. One reason for this is partly unsatisfactory control performance under varying operating conditions, which can result in poor modulation and part load capability. A promising approach to tackle this issue is using dynamic, model-based control strategies, whose effectiveness, however, strongly depend on the model being used. This paper therefore focuses on the derivation of a viable dynamic model to be used for such model-based control strategies for AHPDs such as state feedback or model-predictive control. The derived model is experimentally validated, showing good modeling accuracy. Its modeling accuracy is also compared to alternative model versions, that contain other heat transfer correlations, as a benchmark. Although the derived model is mathematically simple, it does have the structure of a nonlinear differential–algebraic system of equations. To obtain an even simpler model structure, linearization at an operating point is discussed to derive a model in linear state space representation. The experimental validation shows that the linear model does have slightly worse steady-state accuracy, but that the dynamic accuracy seems to be almost unaffected by the linearization. The presented new modeling approach is considered suitable to be used as a basis for the design of advanced, model-based control strategies, ultimately aiming to improve the modulation and part load capability of AHPDs.

Other Publications | 2023

Design of an aqueous phase reforming process demonstration unit for the production of green hydrogen from organcs-laden residual waters

Arlt S, Hochgerner S, Weber G, Pipitone G, Zoppi G, Bensaid S. Design of an aqueous phase reforming process demonstration unit for the production of green hyddrogen from organics-laden residual waters. BEST Center Day. 28 June 2023

Download PDF Details

Aqueous phase reforming (APR) describes the conversion of oxygenated hydrocarbons dissolved in
an aqueous phase to hydrogen and carbon dioxide.

PhD Thesis | 2023

Distributed Optimization Methods for Energy Management Systems

Kaisermayer V. Distributed Optimization Methods for Energy Management Systems. 2023.

Details

Efficient control of energy systems is an important factor in achieving the CO2-emission goals. District heating (DH) networks are an especially relevant example of such energy systems. State-of-the-art control of small and medium-sized DH networks, however, still mainly relies on simple rule-based control concepts. Handling future challenges such as varying prices and intermittent renewable production is difficult to achieve with such control concepts. Optimization-based energy management systems (EMS) are a promising high-level control approach for the efficient operation of DH networks and complex energy systems in general. An especially interesting challenge arises when DH networks grow, as often the opportunity arises to interconnect them. However, if they operated by different owners, the control task becomes challenging, especially for optimization-based EMS. This is because, in the overall objective function, the cost and revenue for any exchange of energy would cancel out. This thesis presents a solution to this challenge. The main focus of this thesis is on the application of distributed optimization methods for EMS in the context of coupled energy systems, operated by multiple owners, especially interconnected DH networks. The presented methods and ideas are evaluated on a practical application of three DH networks in Austria.  

Reports | 2023

District Heating and Cooling Networks in an Integrated Energy System Context (Guidebook)

Final Report of the IEA DHC Annex TS3

Böhm H, Cronbach D, Muschick D, Ianakiev A, Jentsch A, Cadenbach A, Kranzl L, Reuter S, Rossi J, Schmidt RR, Sorknaes P, Svensson IL, Trier D, Tunzi M, Widl E. IEA DHC Annex TS3 Guidebook, District Heating and Cooling in an Integrated Energy System Context, 2023.

External Link Details

Annex TS3: Hybrid Energy Networks

The aim of the IEA DHC Annex TS3 „hybrid energy networks" is to promote opportunities and to overcome challenges for district heating and cooling (DHC) networks in an integrated energy system context, focusing on the coupling to the electricity and the gas grid.

 

Peer reviewed papers | 2023

Early layer formation on K-feldspar during fluidized bed combustion with phosphorus-rich fuel

Faust R, Fürsatz K, Aonsamang P, Sandberg M, Kuba M, Skoglund N, Pavleta Knutsson. Early layer formation on K-feldspar during fluidized bed combustion with phosphorus-rich fuel. Fuel. January 2023.331:125595.

External Link Details

K-feldspar was utilized as bed material for fluidized bed combustion of bark, chicken manure, and their mixture. Bed samples were extracted after 4 and 8 h and the samples were analyzed with scanning electron microscopy to study the impact of P-rich chicken manure on the bed material. The results were compared to fixed bed exposures with different orthophosphates to investigate their influence in detail.

The fresh bed material used for this study exhibited an uneven surface with many cavities which facilitated the deposition and retention of the fuel ash. Utilizing pure chicken manure as fuel led to the formation of Ca- and P-rich particles which accumulated in these cavities. At the same time, larger ash particles were formed which consisted of the elements found in chicken manure ash. The co-combustion of bark and chicken manure led to the interaction of the two ash fractions and the formation of a thicker ash layer, which consisted of elements from both fuel ashes, namely Ca, P, Si, K and S. The layer appeared to be partially molten which could be favorable for the deposition of ash particles and thereby the formation of a mixed Ca/K-phosphate. Fixed bed exposures of the K-feldspar particles with Na3PO4 or K3PO4 caused particle agglomeration which means presence of alkali-phosphates should be limited.

The co-combustion of bark with chicken manure showed promising results both regarding a shift from Ca-phosphates to more bioavailable Ca/K-phosphates and an acceleration in ash layer formation. The formation of an ash layer after only 4 h of exposure with the mixture of bark and chicken manure could be advantageous for catalytic activation of the bed material.

Peer reviewed papers | 2023

Effect of time-dependent layer formation on the oxygen transport capacity of ilmenite during combustion of ash-rich woody biomass

Priscak J, Valizadeh A, Öhman M, Hofbauer H, Kuba M. Effect of time-dependent layer formation on the oxygen transport capacity of ilmenite during combustion of ash-rich woody biomass. Fuel. 1 December 2023. 353:129068

External Link Details

Oxygen carrier aided combustion (OCAC) is a novel technology that aims to enhance combustion of heterogenous fuels by replacing the inert bed material with an active oxygen carrier. One of the promising oxygen carriers is natural ilmenite which shows decent oxygen transport capacity and mechanical stability under OCAC operating conditions. However, interactions between ilmenite and woody biomass ash lead to the formation of a calcium-rich ash layer, which affects the ability of the oxygen carrier (OC) to transfer oxygen throughout the boiler and subsequently decreases the combustion efficiency. This paper focuses on the time-dependent morphological and compositional changes in ilmenite bed particles and the consequence effects on the oxygen transport capacity and reactivity of ilmenite. Ilmenite utilized in this study was investigated in a 5 kW bubbling fluidized bed combustion unit, utilizing ash-rich bark pellets as fuel. A negative effect of iron migration on the oxygen transport capacity was observed in ilmenite bed particles after 6 h of operation in the bubbling fluidized bed reactor. The decrease in the oxygen transport capacity of ilmenite was found to correlate with the increased exposure time in the fluidized bed reactor and was caused by the migration and subsequent erosion of Fe from the ilmenite particles. On the other hand, the older bed particles show an increase in reaction rate, presumably due to the catalytic activity of the calcium-enriched outer layer on the bed particle surface.

Other Publications | 2023

Efficiency increase of biomass combustion systems by a modular CO-lambda optimization: method and results from long-term verification

Zemann C, Max A, Gölles M, Horn M. Efficiency increase of biomass combustion systems by a modular CO-lambda optimization: method and results from long-term verification. 7. Mitteleuropäische Biomassekonferenz: CEBC 2023. 19. Jan 2023. Oral presentation.

Download PDF Details

Introduction and motivation
A key objective for the operation of biomass boilers is to achieve the highest possible efficiency while emitting the lowest possible pollutant emissions. In order to automate this task, CO-lambda optimization methods have been proposed in literature that ensure that the biomass boiler is operated at the lowest excess air ratio at which no relevant pollutant emissions occur, maximizing efficiency as a result. Since this optimal excess air ratio depends on various external factors, such as fuel properties, CO-lambda optimization methods continuously incorporate new measurements of the excess air ratio and the carbon monoxide content of the flue gas and estimate a new optimal excess air ratio during operation.
While achieving promising results in lab-scale tests, none of the CO-lambda optimization methods presented in literature has yet been able to gain practical acceptance. Either they are not robust enough and provide inaccurate estimates of the optimal excess air ratio or they are too slow and do not allow the optimal excess air ratio to be tracked sufficiently quickly. With the goal of providing a method that is fit for practical application, this publication presents a new modular approach for CO-lambda optimization that determines the optimal excess air ratio robustly and quickly, i.e. in real time.


Method
The new approach for CO-lambda optimization approximates the correlation between the excess air ratio and the carbon monoxide content of the flue gas, the CO-lambda characteristic, with a continuous, algebraic, non-linear model function. For this purpose, it uses a recursive-least-squares algorithm to continuously identify the model function’s parameters that lead to the optimal fit with the measured data, which are the excess air ratio and carbon monoxide content of the flue gas. From these model parameters, the optimal excess air ratio is calculated and defined as a desired value for the biomass boiler’s existing controller. This existing controller then ensures, that the biomass boiler is operated with this desired optimal excess air ratio, thus, maximizing efficiency and decreasing pollutant emissions. As a result, this new approach for CO-lambda optimization is entirely modular and can be applied to any biomass boiler with an existing control strategy capable of accurately adjusting the excess air ratio. For the measurement of the carbon monoxide content of the flue gas, a separate sensor has to be used. For this study the commercially available and proven in-situ exhaust gas sensor “KS1D” provided by the company LAMTEC has been used.


Long-term verification
The new approach for CO-lambda optimization was tested and validated at a biomass boiler with a nominal capacity of 2.5 MW that supplies a local heating network and combusts wood chips with a water content ranging from 30 w.t.% to 50 w.t.%. The long-term validation took place over an entire heating period, i.e. 5 months from November to March, during which the biomass boiler was operated alternately with the new approach for CO-lambda optimization and the standard control strategy, which means a constant desired residual oxygen content. In total the new approach for CO-lambda optimization was active for 1155 operating hours while the standard control strategy was active for 1310 operating hours. Compared to the standard control strategy, the new approach for CO-lambda optimization increased the biomass boiler’s efficiency by 3.8%, decreased total dust emissions by 19.5% and reduced carbon monoxide emissions on average (median) by 200 mg/m³. This demonstrates that the new approach for CO-lambda optimization is not only robust enough to run over a long period of time, it also leads to significant improvements in the biomass boiler’s operation. In addition, following these results, this new approach for CO-lambda optimization has also successfully been implemented and demonstrated at another biomass boiler with a nominal capacity of 1 MW where it has already been active for several months. This contribution presents the new approach to CO-lambda optimization in detail and discusses its technological and economic impact.

Other Publications | 2023

Exploring microbiomes in environmental biotechnological processes

Bauer L, Konegger H, Neubauer M, Ludiwg K, Drosg B. Exploring microbiomes in environmental biotechnological processes. BEST Center Day. 28 June 2023

Download PDF Details

Many processes in environmental biotechnology are working due to the presence of a mix of microbes, with each group playing a specific role, like being responsible for one step of a multistage conversion process. Even in industrial fermentations which have the purpose of producing biomass of one specific microorganism, an accompanying flora of other microbes is almost always present.

Peer reviewed papers | 2023

Extension of the layer particle model for volumetric conversion reactions during char gasification

Steiner T, Schulze R, Scharler R, Anca-Couce A. Extension of the layer particle model for volumetric conversion reactions during char gasification. Combustion and Flame. 2023:256,112940.

External Link Details

The so-called “layer model” or “interface-based model” is a simplified single particle model, originally developed for shorter computation time during computational fluid dynamics (CFD) simulations. A reactive biomass particle is assumed to consist of successive layers, in which drying, pyrolysis and char conversion occur sequentially. The interfaces between these layers are the reaction fronts. The model has already been validated for drying, pyrolysis and char oxidation. Layer models in the literature have commonly employed surface reactions at the reaction front to describe char conversion. In this work, the suitability of this surface reaction concept is assessed when gasifying biochar. It is shown that a particular layer model, already available, which originally employed surface reactions, was unable to adequately describe the mass loss during gasification of a biochar. In order to overcome this incapability, the model was extended to consider volumetric reactions in the char layer. The influence of intraparticle diffusion was considered through an effectiveness factor. The model is easily adaptable for different gas-solid kinetic rate laws, while still allowing for comparably fast solutions of the model equations. The extended model was validated using theoretical calculations and experimental measurements from literature. It was demonstrated that intraparticle diffusion can significantly slow down the biochar gasification process. A general guideline for when to employ volumetric reactions, rather than surface reactions, and when to consider intraparticle diffusion is provided based on the Thiele modulus as the criterion.

Peer reviewed papers | 2023

Fault detective: Automatic fault-detection for solar thermal systems based on artificial intelligence

Feierl L, Unterberger V, Rossi C, Gerardts B, Gaetani M. Fault detective: Automatic fault-detection for solar thermal systems based on artificial intelligence. Solar Energy Advances 2023;3:100033. https://doi.org/10.1016/j.seja.2023.100033.

External Link Details

Fault-Detection (FD) is essential to ensure the performance of solar thermal systems. However, manually analyzing the system can be time-consuming, error-prone, and requires extensive domain knowledge. On the other hand, existing FD algorithms are often too complicated to set up, limited to specific system layouts, or have only limited fault coverage. Hence, a new FD algorithm called Fault-Detective is presented in this paper, which is purely data-driven and can be applied to a wide range of system layouts with minimal configuration effort. It automatically identifies correlated sensors and models their behavior using Random-Forest-Regression. Faults are then detected by comparing predicted and measured values.

The algorithm is tested using data from three large-scale solar thermal systems to evaluate its applicability and performance. The results are compared to manual fault detection performed by a domain expert. The evaluation shows that Fault-Detective can successfully identify correlated sensors and model their behavior well, resulting in coefficient-of-determination scores between R²=0.91 and R²=1.00. In addition, all faults detected by the domain experts were correctly spotted by Fault-Detective. The algorithm even identified some faults that the experts missed. However, the use of Fault-Detective is limited by the low precision score of 30% when monitoring temperature sensors. The reason for this is a high number of false alarms raised due to anomalies (e.g., consecutive days with bad weather) instead of faults. Nevertheless, the algorithm shows promising results for monitoring the thermal power of the systems, with an average precision score of 91%.

Other Publications | 2023

First results from a novel temperature swing adsorption plant for clean synthesis gas

Egger A, Binder M, Weber G, Fürsatz K. First results from a novel temperature swing adsorption plant for clean synthesis gas. BEST Center Day. 28 June 2023

Download PDF Details
Other Publications | 2023

Fischer-Tropsch pilot plant

Hochgerner S, Arlt S, Köffler T, Weber G, Kuba M, Rauch R, Hofbauer H. Fischer-Tropsch plant. BEST Center Day. 28 June 2023

Download PDF Details

This work presents the first results of a newly commissioned biomass-to-liquid Fischer-Tropsch (FT) pilot plant. A 1 MWth dualfluidized bed (DFB) steam gasifier, a 55 Nm3/h 4-step gas cleaning plant and a 250 kW slurry bubble column FT synthesis reactor (SBCR) form the full process chain.

Other Publications | 2023

FlowBattMonitor - Modellgestützte Überwachung von erneuerbaren Flow Batterien (Poster)

Nigitz T, Spirk S, Poms U, Wickenhauser D. FlowBattMonitor - Modellgestützte Überwachung von erneuerbaren Flow Batterien. Poster. 2023.

Download PDF Details
Other Publications | 2023

Further development of gas-fermentation towards syngas utilization and electro-fermentation

Ludwig K, Hiebl C, Marzynski M, Deutsch M, Poms U, Schulze K, Neubauer M, Knoll L, Rachbauer L, Gölles M, Fuchs W, Drosg B. Further development of gas-fermentation towards syngas utilization and electro-fermentation. BEST center day. 28 June 2023.

Download PDF Details

Gas-fermentation is the conversion of gaseous feedstocks (e.g. CO2-rich off gases, CO, H2) into
valuable products such as organic acids and alcohols by microorganisms such as clostridia.
By supplying electrical energy (an alternative source of reducing/oxidizing energy), the fermentation
environment can be further optimized, resulting in products with higher purity, a broader product
spectrum and higher cell densities.

Other Publications | 2023

Green Carbon as reducing agent in iron and steel production via the blast furnaces

Deutsch R, Krammer G, Kienzl N, Strasser C. Green Carbon as reducing agent in iron and steel production via the blast furnaces. BEST Center Day. 28 June 2023

Download PDF Details

Iron production via blast furnace utilizes coal and coke to reduce iron oxides resulting in high greenhouse gas emissions. This important issue for the iron and steel industry may be mitigated by application of biomass-based reducing agents (bioreducer).

Other Publications | 2023

GreenCarbon Biochar - bio-oil - gas

Wopienka E. GreenCarbon. BEST Center Day. 28 June 2023

Download PDF Details

Simple biorefinery concepts for the production of sustainable carbon products are investigated in the GreenCarbon Lab at the Wieselburg site of BEST. The heart of the GreenCarbon Lab consists of two pyrolysis units: A lab-scale reactor for testing new input materials as well as conducting detailed parameter studies to reveal the correlation of input material, process conditions and products formed, and a pilot-scale to implement and validate knowledge gained in the laboratory environment to
produce specific GreenCarbon products. Also, product batches in larger quantities (approx. 0,1 – 5 tons) can be manufactured for subsequent application tests – e.g. as part of industrial trials at company partners. In addition, equipment for process and product analysis enables a detailed study of the conversion reactions and the characterization of the products obtained.

Reports | 2023

Guidebook for the Digitalisation of District Heating: Transforming Heat Networks for a Sustainable Future

Final Report of DHC Annex TS4

Schmidt, Dietrich (ed.) et al. (2023). Guidebook for the Digitalisation of District Heating: Transforming Heat Networks for a Sustainable Future, Final Report of DHC Annex TS4. AGFW Project Company, Frankfurt am Main, Germany.

External Link Details
Other Publications | 2023

How bioenergy contributes to a sustainable future

Bacovsky D. How bioenergy contributes to a sustainable future. BEST Center Day. 28 June 2023

Download PDF Details

Bioenergy is the largest source of renewable energy today. It is versatile and can provide heat, power and transport services, and biomass can also serve as a raw material for the production of chemicals and materials. If done responsibly, and wherever it substitutes for fossil fuels, bioenergy provides substantial GHG emission savings, diversifies energy sources, improves energy supply security and provides income through regional biomass supply chains.

Conference presentations and posters | 2023

IEA Cross TCP Workshop: Towards a flexible, cross sectoral energy supply

Gölles M, Schubert T, Lechner M, Mäki E, Kuba K, Leusbrock I, Unterberger V, Schmidt D. IEA Cross TCP Workshop: Towards a flexible, cross sectoral energy supply.7th Central European Biomass Conference CEBC 2023. 18. January 2023. Graz. Oral Presentation.

Download PDF Details

A sustainable energy supply can only be achieved by a flexible, cross-sectoral energy system utilizing the specific advantages of the various renewable technologies. In this workshop possible roles of different technologies will be discussed based on a previous discussion of the users’ needs among the different sectors. In this a special focus should be given on the flexibility provision via the heating sector. By bringing together different users, representing municipal and industrial energy supply, and technological experts from different IEA Technology Collaboration Programmes (TCP) the workshop should support a holistic discussion.

List of presentations: 

  • Wien Energie‘s vision of a sustainable energy and ressource supply of Vienna, Teresa Schubert, Wien Energie, Austria
  • Digitalization of energy management systems – optimization of internal energy use as an industrial company, Maria Lechner, INNIO Jenbacher, Austria
  • Flexible Bioenergy and System Integration, Elina Mäki, VTT Technical Research Centre of Finland, Finland Task Leader – IEA Bioenergy Task 44 Flexible Bioenergy and System Integration
  • Use Case: Syngas platform Vienna for utilization of biogenic residues, Matthias Kuba, BEST – Bioenergy and Sustainable Technologies, Austria
  • Transformation of District Heating and Cooling Systems towards high share of renewables, Ingo Leusbrock, AEE INTEC, Austria – Lead of Austrian delegation – IEA DHC Annex TS5 Integration of Renewable Energy Sources into existing District Heating and Cooling Systems
  • Opportunities offered by long-term heat storages and large-scale solar thermal systems, Viktor Unterberger, BEST – Bioenergy and Sustainable Technologies, Austria Task Manager – IEA SHC Task 68 Efficient Solar District Heating Systems
  • Possibilities through digitalization on the example of District Heating and Cooling, Dietrich Schmidt, Fraunhofer Institute for Energy Economics and Energy System Technology IEE, Germany – Operating Agent – IEA DHC Annex TS4 Digitalisation of District Heating and Cooling

List of contributing IEA Tasks:

Other Publications | 2023

Increased flexibility of a fixed-bed biomass gasifier through advanced control

Hollenstein C, Martini S, Gölles M, Felsberger W, Horn M. Increased flexibility of a fixed-bed biomass gasifier through advanced control. BEST Center Day. 28 June 2023

Download PDF Details
Conference presentations and posters | 2023

Increasing the flexibility of a fixed-bed biomass gasifier through model-based control strategies: method and practical verification

Hollenstein C, Zemann C, Martini S, Gölles M, Felsberger W, Horn M. Increasing the flexibility of a fixed-bed biomass gasifier through model-based control strategies: method and practical verification. 7. Mitteleuropäische Biomassekonferenz: CEBC 2023. 20. Jan 2023. Oral presentation.

Download PDF Details

Future hybrid energy systems require flexible technologies for compensating the volatile nature of most renewable energies. As such, fixed-bed biomass gasifiers are especially relevant as they allow a flexible production of heat, electricity and in a broader sense bio-based products (e.g. biochar). Thus, flexible fixed-bed biomass gasifiers will continuously become more relevant for a sustainable and highly flexible energy and resource system (bioeconomy).

 

However, due to their current economic dependency on specific feed in tariffs for the produced electricity, they are almost always operated at nominal load, to maximize the electricity production. Thus, their potential for flexibility has not been revealed up to now. Consequently, the currently applied control strategies are typically designed with the focus on steady-state operation. Any operation differing from nominal load typically requires manual interventions of the plant operators to avoid lower efficiencies or operational difficulties. Thus, currently applied control strategies do not allow a fully-automatic and flexible operation of the gasifiers.

 

To unleash the full potential of the gasifiers’ flexibility, new and more advanced control strategies able to handle varying operating conditions automatically are required. For this reason, this contribution aims for the development of a model-based control strategy, since it allows to explicitly consider all the correlations between the different process variables, and an efficient adaptation of the control strategy to different plants. The development was carried out on the basis of a representative industrial small-scale fixed-bed biomass gasifier operated as combined heat and power plant (CHP) with a nominal capacity of 300 kWth and 150 kWel. In this contribution we present the developed method as well as the practical verification of the model-based controller for the industrial small-scale fixed-bed biomass gasification plant.

 

The practical verification revealed a significant potential for flexibility increase by the new model-based control strategy in comparison to state-of-the-art control strategies. For example, the new controller performs a step-wise load change from 150 kWel to 100 kWel (-33%) within less than 2 min without affecting the gasification performance. The new control leads to a much more homogeneous gasification, in particular during partial load operation, and reduces the fluctuation margin of relevant process parameters to less than 1%. This controlled stabilization and homogenization of the gasification at different operating conditions is also a prerequisite for further future flexibilization measures, e.g. the extension of the feedstock variety (fuel flexibility) or increasing product flexibility.

 

Due to the modular and model-based design, the new control strategy can also be implemented on other fixed-bed gasifiers of the same type without requiring any structural modifications, by solely adjusting the model parameters appropriately. Furthermore, the new control strategy makes only use of sensors and actuators typically already available in state-of-the-art fixed-bed gasification systems. In conclusion, the model-based control strategy to be presented states a very important contribution towards flexible fixed-bed biomass gasification systems.

 

Peer reviewed papers | 2023

Integration of dual fluidized bed steam gasification into the pulp and paper industry

Kuba M, Benedikt F, Fürsatz K, Fuchs J, Demuth M, Aichernig C, Arpa L, Hofbauer H. Integration of dual fluidized bed steam gasification into the pulp and paper industry. Biomass Conversion and Biorefinery. 17 Novewmber 2023.13:15933 - 15948

External Link Details
Conference presentations and posters | 2023

Intelligent Building Control with User Feedback in the Loop

Kaisermayer V, Muschick D, Gölles M, Schweiger G, Schwengler T, Mörth M, Heimrath R, Mach T, Herzlieb M, Horn M. Intelligent Building Control with User Feedback in the Loop. 9th International Conference on Smart Energy Systems. Kopenhagen, Denmark, 12. September 2023. Oral Presentation.

Details

Buildings account for 30% of the globally consumed final energy and 19% of the indirect emissions, i.e., from the production of electricity and heat. Air-conditioned office buildings have an especially high energy footprint. Retrofitting buildings with predictive control strategies can reduce their energy demand and increase thermal comfort by considering future weather conditions. One challenge lies in the required infrastructure, i.e., sensors and actuators. Another challenge is about satisfying the comfort requirements of the users, getting their feedback and reacting to it. We propose a predictive control strategy, where an optimization-based energy management system (EMS) controls the thermal zones of such office buildings. The approach uses a mathematical model of the building within an optimization problem to predict and shift thermal demand. The individual thermal zones are modelled using a grey-box approach, where the simultaneous state and parameter estimation is handled by an unscented Kalman filter (UKF). This minimizes the needed effort for deployment of the system, as the parameters are learned automatically from historical measurement data. The objective function ensures the users’ comfort based on a comfort model, penalizes unwanted behaviour such as frequent valve position changes, and minimizes the costs for heating and cooling supply. Since the offices are typically shared by multiple users, the internal comfort model is calibrated based on their feedback. Each feedback is viewed as a measurement from the internal comfort model, and an UKF updates the parameters of the model, thus lowering or increasing the temperature setpoint of the zone controller in a robust manner. As a case study, an office building at the “Innovation District Inffeld” is considered. The proposed predictive control strategy, together with the user feedback, is implemented. A central information and communication technology (ICT) handles all communication with the building automation system. We developed a simple web-based feedback system with a five-point Likert scale for user feedback integration. The presented ideas are evaluated based on both a preliminary simulation study and potential evaluation using the building modelling software IDA ICE, and a real-world implementation. A key requirement was to limit the number of new sensors and actuators, thus focusing on how much can be achieved with a retrofit measure with minimal hardware, but intelligent software. The presentation will give, an overview of the developed methods and first results of the real implementation will be given.

Peer reviewed papers | 2023

Investigation of individual motives and decision paths on residential energy supply systems

Matschegg D, Carlon E, Sturmlechner R, Sonnleitner A, Fuhrmann M, Dißauer C, Strasser C, Enigl M. Investigation of individual motives and decision paths on residential energy suplly systems. Energy. 2023. 281:128151.

External Link Details

A better understanding of end users’ motives for choosing their energy supply system (heating and domestic hot water, cooling and electricity) can support the establishment of favorable conditions for the energy transition. In this research project, a survey was conducted in the Austrian residential sector to identify end users’ interests and decisions for certain energy supply systems as well as motives for the choice. Based on 169 responses to the questionnaire, a statistical analysis was performed to evaluate the influence of gender aspects on interests and decisions. More than 90% of respondents required robust and efficient energy supply systems, which should have the highest technical standards. The environmental performance was also highly valued, whereas financial aspects, including investment costs were considered less important. 79% of men were mainly involved in the decision-making process, whereas only 59% of women were involved and, in most cases, made the decision together with their partner (52%). Identifying these motives and analyzing investment decisions enables the future integration of social and gender aspects into optimization models for individual households or energy communities.

Other Publications | 2023

Key Driver: Sustainability

Dißauer C, Fuhrmann M, Matschegg D, Strasser C. Key Driver: Sustainability

Download PDF Details
Other Publications | 2023

Long-term validation of a new modular approach for CO-Lambda-optimization

Nigitz T, Hammer F, Gölles M, Horn M.

Download PDF Details
Other Publications | 2023

Microgrid Forschungslabor für 100 % dezentrale Energieversorgung

E7 und E8 Ergebnisbericht: Innovative Konzepte für marktfähige Produkte und Dienstleistungen

Download PDF Details

Die Erkenntnisse der Arbeitspakete I, II und III bildeten die Grundlage, um Konzepte für
innovative Produktentwicklungen von Systemkomponenten für Microgrids zu entwickeln und
diese fertigzustellen. Dazu erfolgte in Arbeitspaket I die Analyse und Planung der verwendeten
Wärme-, Strom- und Kältetechnologien, welche in AP II installiert und ins lokale System
integriert wurde. Die Datenerfassung, Monitoring und Bewertung des Nutzerverhaltens erfolgte
im Anschluss in AP III. Dadurch wurden die Rahmenbedingungen geschaffen um neue
Produkte und Dienstleistungen zu entwickeln und zu testen.

Other Publications | 2023

Microgrids and Smart Energy Communities - Reference Projects and Use Cases

Aigenbauer S, Stadler M, Liedtke P, Sturmlechner R; Maier C, Mansoor M, Oberbauer C, Alavi F, Houben N, Haas R. Microgrids and Smart Energy Communities - Reference Projects and Use Cases. BEST Center Day. 28 June 2023

Download PDF Details
Peer reviewed papers | 2023

MIMO state feedback control for redundantly-actuated LiBr/H O absorption heat pumping devices and experimental validation

Staudt S, Unterberger V, Muschick D, Gölles M, Horn M, Wernhart M, Rieberer R. MIMO state feedback control for redundantly-actuated LiBr/H2O absorption heat pumping devices and experimental validation. Control Engineering Practice.2023:140.105661. https://doi.org/10.1016/j.conengprac.2023.105661

External Link Details

Absorption heat pumping devices (AHPDs, comprising absorption heat pumps and chillers) use mainly thermal energy instead of electricity as the driving energy to provide resource-efficient heating and cooling when using waste heat or renewable heat sources. Despite this benefit, AHPDs are still not a very common technology due to their complexity. However, better modulation and part-load capability, which can be achieved through advanced control strategies, can simplify the use of AHPDs and help to better integrate them into complex energy systems. Therefore, this paper presents a new, dynamic model-based control approach for single-stage AHPDs that can extend an AHPD’s operating range by employing multi-input-multi-output (MIMO) control methods. The control approach can be used for different AHPD applications and thus control configurations, i.e., different combinations of manipulated and controlled variables, and can also be used for redundantly-actuated configurations with more manipulated than controlled variables. It consists of an observer for the state variables and unknown disturbances, a state feedback controller and, in case of redundantly-actuated configurations, a dynamic control allocation algorithm. The proposed control approach is experimentally validated with a representative AHPD for two different control configurations and compared to two benchmark control approaches – single-input-single-output (SISO) PI control representing the state-of-the-art, and model-predictive control (MPC) as an alternative advanced control concept. The experimental validation shows that the two MIMO control approaches (the proposed state feedback and the MPC approach) allow for a wider operating range and hence better part load capability compared to the SISO PI control approach. While MPC generally results in a comparably high computational effort due to the necessity of continuously solving an optimization problem, the proposed state feedback control approach is mathematically simple enough to be implemented on a conventional programmable logic controller. It is therefore considered a promising new control approach for AHPDs with the ability to extend their operating range and improve their part load capability, which in turn facilitates their implementation and thus the use of sustainable heat sources in heating and cooling systems.

Other Publications | 2023

Model-based Building Energy Management System with User Feedback in the Loop

Kaisermayer V, Muschick D, Gölles M, Horn M. Model-based Building Energy Management System with User Feedback in the Loop. BEST Center Day. 28 June 2023

Download PDF Details

Optimization-based energy management systems (EMS) are a high-level control approach for energy systems like district heating networks. A descriptive model and objective function are required to solve an optimization problem and apply the resulting schedule in a receding horizon fashion. EMS for buildings require a simplified model of each thermal zone, and the objective function includes costs for heating and cooling, virtual costs, and a comfort model. Feedback from users is necessary since thermal comfort varies among individuals.

PhD Thesis | 2023

Model-based control of absorption heat pumping devices

Staudt S. Model-based control of absorption heat pumping devices. 2023. 170 S.

Details

Absorptionswärmepumpenanlagen (AWPA, beinhaltet Absorptionswärmepumpen und –kältemaschinen), sind Anlagen, die hauptsächlich thermische statt elektrischer Energie nutzen, um Wärme und Kälte zu generieren. Dadurch wird die Nutzung von Abwärme und erneuerbaren Energiequellen wie Solarenergie in Heiz- und Kühlsystemen erleichtert. Trotz dieses Vorteils ist der Einsatz von AWPA nach wie vor stark eingeschränkt. Ein Grund dafür ist das Fehlen von Regelungsstrategien, die eine zufriedenstellende Regelgüte über einen weiten Betriebsbereich, insbesondere unter Teillast, bieten. Deshalb befasst sich diese Arbeit mit der Entwicklung eines neuen, modellbasierten Regelungsansatzes für AWPA, die den Betriebsbereich durch den Einsatz von Mehrgrößen-Regelungsmethoden (multi-input-multi-output (MIMO) Regelungsmethoden) erweitern kann.



Zunächst wird ein geeignetes dynamisches Modell abgeleitet, das im modellbasierten Regelungsansatz verwendet werden soll. Es handelt sich um ein physikalisch basiertes Modell mit modularer Struktur, was eine systematische Anpassung an verschiedene AWPA erleichtert. Um die Anzahl der Zustandsvariablen niedrig zu halten, werden nur diejenigen Masse- und Energiespeicher berücksichtigt, die zu Zeitkonstanten und Totzeiten führen, die für die spätere Regelungsaufgabe relevant sind. Das entwickelte Modell ist mathematisch einfach, hat jedoch die Struktur eines nichtlinearen differential-algebraischen Gleichungssystems. Als solches ist es sehr gut als Simulationsmodell geeignet um verschiedene Regelungsstrategien in der Simulation zu testen, aber es ist zu komplex für viele modellbasierte Regelungsmethoden. Um eine noch einfachere Modellstruktur zu erhalten, wird das Modell an einem Betriebspunkt linearisiert, was auf ein Modell in linearer Zustandsraumdarstellung führt. Die entwickelten nichtlinearen und linearen Modelle werden experimentell validiert und mit zwei alternativen Modellierungsansätzen als Benchmark verglichen. Ein Vergleich zwischen dem abgeleiteten nichtlinearen Modell und den Benchmark-Modellen zeigt eine höhere Genauigkeit für das neue Modell, sowohl stationär als auch dynamisch. Ein Vergleich zwischen dem abgeleiteten nichtlinearen und dem linearisierten Modell zeigt, dass das linearisierte Modell zwar eine etwas schlechtere stationäre Genauigkeit aufweist, die dynamische Genauigkeit jedoch durch die Linearisierung nahezu unbeeinflusst zu sein scheint. Das vorgestellte neue linearisierte AWPA -Modell gilt daher als geeignet, als Grundlage für den Entwurf des modellbasierten Regelansatzes verwendet zu werden.



Als nächstes wird dieses Modell verwendet, um einen neuen modellbasierten Regelungsansatz für AWPA zu entwerfen. Der neue Regelungsansatz kann für verschiedene AWPA-Anwendungen und damit für verschiedene Regelungskonfigurationen verwendet werden, d.h., verschiedene Kombinationen von Stell- und Regelgrößen. Er kann auch für redundante aktuierte Konfigurationen mit mehr Stell- als Regelgrößen verwendet werden, was die Erweiterung des Betriebsbereichs einer AWPA ermöglicht. Der Ansatz besteht aus einem Beobachter für die Zustandsvariablen und unbekannte Störgrößen, einem Zustandsregler und, im Falle von redundant aktuierten Konfigurationen, einem Algorithmus zur dynamischen Stellgrößenverteilung. Der vorgeschlagene Regelungsansatz wird experimentell für zwei verschiedene Regelungskonfigurationen validiert und mit zwei Benchmark-Ansätzen verglichen – einem Eingrößen-PI-Regler (Single-input-single-output (SISO) PI-Regler), der den Stand der Technik repräsentiert, und einem modellprädiktiven Regelungsansatz (model predictive control, MPC) als alternative fortschrittliche Regelungsmethode. Die experimentelle Validierung zeigt, dass die beiden MIMO-Regelungsansätze (der vorgeschlagene Zustandsregler und der MPC-Ansatz) einen erweiterten Betriebsbereich und somit eine bessere Teillastfähigkeit im Vergleich zum SISO-PI-Regler ermöglichen. Während MPC durch die Notwendigkeit zur kontinuierlichen Lösung eines Optimierungsproblems im Allgemeinen eine vergleichsweise hohe Rechenleistung benötigt, ist der vorgeschlagene Zustandsregler-Ansatz mathematisch einfach genug, um auf herkömmlichen speicherprogrammierbaren Steuerungen für AWPA implementiert werden zu können. Er wird daher als vielversprechender neuer Regelungsansatz für AWPA betrachtet, der die Möglichkeit bietet, ihren Betriebsbereich zu erweitern und ihre Teillastfähigkeit zu verbessern, was wiederum eine einfachere Einbindung in moderne Energiesysteme ermöglicht und somit die Nutzung nachhaltiger Wärmequellen für Heizen und Kühlen erleichtert.

PhD Thesis | 2023

Modelling and control of a small-scale fixed-bed biomass gasification system

Hollenstein C. Modelling and control of a small-scale fixed-bed biomass gasification system. 2023.

Details
Peer reviewed papers | 2023

Multi-scale modelling of a fluidized bed biomass gasifier of industrial size (1 MW) using a detailed particle model coupled to CFD: Proof of feasibility and advantages over simplified approaches

von Berg L, Anca-Couce A, Hochenauer C, Scharler R. Multi-scale modelling of a fluidized bed biomass gasifier of industrial size (1 MW) using a detailed particle model coupled to CFD: Proof of feasibility and advantages over simplified approaches. Energy Conversion and Management. 15 June 2023.286:117070

External Link Details

Fluidized bed biomass gasification is a complex process whereby gas source terms are released by reactions at the particle level during the movement of fuel particles throughout the reactor. The current study presents for the first time the application of a multi-scale modelling approach for a fluidized bed biomass gasifier of industrial size, coupling a detailed one-dimensional particle model based on the progressive conversion model (PCM) with a commercial CFD software. Results of particle movement and gas source terms are compared with results of an additional simulation employing the simplified uniform conversion model (UCM) which is commonly used in literature. Validation at the particle level showed that the UCM leads to a massive underprediction of the time needed for pyrolysis whereas the PCM is in good agreement with experimental data. This heavily influences the gas sources released during pyrolysis of the biomass particles in the coupled reactor simulations. Volatiles are much more concentrated to the close proximity of the fuel feed when using the UCM whereas the PCM leads to a more homogeneous distribution over the reactor cross-section. The calculation time analysis of the coupled simulations showed that despite the increased complexity, the PCM shows only an increase of 20% in calculation time when compared to the UCM, whereas it is much better suited for these conditions. The coupled multi-scale simulations using the PCM showed the numerical feasibility of the modelling approach for 1,200,000 bed parcels and about 80,000 reacting fuel parcels and furthermore highlighted the importance of a comprehensive description of the particle level.

Other Publications | 2023

Numerical investigation of reaction mechanisms on NOx emissions from biomass combustion with enhanced reduction

Eßl M, Schulze K. Numerical investigation of reaction mechanisms on NOx emissions from biomass combustion with enhanced reduction. BEST Center Day. 28 June 2023

Download PDF Details

With the increasing demand for lower emissions and innovative combustion technologies, it is necessary to have a reaction mechanisms that is accurate as well as computationally affordable for geometry and process optimization using computational fluid dynamics (CFD). The objective of this work is to explore the applicability of several reaction mechanisms in predicting NOx emissions from various combustion systems. This work focuses on the selection of suitable mechanisms from literature (see Table 1) in a full scale 3D model for the prediction of NOX especially for furnaces with low oxygen concentration in the fuel bed and enhanced reduction zones.

Filter

Kontaktieren Sie uns

Sie erreichen unser Office unter der Adresse office@best-research.eu

Nutzen Sie auch die Möglichkeit, direkt von dieser Webseite eine Nachricht an unsere Mitarbeiter*innen zu schicken. Schnell und unkompliziert.

Zur Team-Seite