Publication | Peer Reviewed Scientific Journals | Verbrennung

Characteristics and synergistic effects of co-combustion of carbonaceous wastes with coal

Onenc S, Retschitzegger S, Evic N, Kienzl N

Published June 2017

Citation: Onenc S, Retschitzegger S, Evic N, Kienzl N. Characteristics and synergistic effects of co-combustion of carbonaceous waste with coal. ATHENS 2017 5th International Conference on Sustainable Solid Waste Management (Poster). June 2017, Athens, Greece.

Abstract

This study presents combustion behavior and emission results obtained for different fuels: poultry litter (PL) and its char (PLC), scrap tires (ST) and its char (STC) and blends of char/lignite (PLC/LIG and STC/LIG). The combustion parameters and emissions were investigated via a non-isothermal thermogravimetric method and experiments in a lab-scale reactor. Fuel indexes were used for the prediction of high temperature corrosion risks and slagging potentials of the fuels used. The addition of chars to lignite caused a lowering of the combustion reactivity (anti-synergistic effect). There was a linear correlation between the NOx emissions and the N content of the fuel. The form of S and the concentrations of alkali metals in the fuel had a strong effect on the extent of SO2 emissions. The use of PL and PLC in blends reduced SO2 emissions and sulphur compounds in the fly ash. The 2S/Cl ratio in the fuel showed that only PLC and STC/PLC would show a risk of corrosion during combustion. The ratio of basic to acidic oxides in fuel indicated that ST, STC and STC/LIG have low slagging potential. The molar (Si + P + K)/(Ca + Mg) ratio, which was used for PL, PLC and PLC containing blends, showed that the ash melting temperatures of these fuels would be higher than 1000 °C.

External Link